Product Description
he product is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. Silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.

Product Feature
he product is specially designed for silicon pads which requires to be exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. Silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.

Product Specification/Models
Model: 900#
Specifications:
Appearance: yellow
Viscosity (cs): 20000~25000
Hardness (A): 28~30
Tensile strength (kgf /cm) ≥35
Tear-strength(kgf /cm)≥24
Elongation break: (%)≥400
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time (min): 30
Curing time (hours): 2-4

Model: 911#
Appearance: yellow, red, green, white
Viscosity(cs): 20000~25000
Hardness(A): 28-30
Tensile strength (kgf/cm) ≥35
Tear-strength (kgf/cm) ≥24
Elongation break: (%)≥400
Retractility (%): ≤0.3
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4

Model: 912#
Appearance: red, green
Viscosity(cs): 20000~25000
Hardness(A): 28-30
Tensile-strength (kgf/cm) ≥35
Tear-strength (kgf/cm) ≥24
Elongation break: (%)≥400
Retractility (%): ≤0.3
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 918#
Appearance:yellow, red, green, white
Viscosity(cs): 18000~20000
Hardness(A): 22~24
Tensile strength (kgf/cm) ≥32
Tear Strength (kgf/cm) ≥20
Elongation break: (%)≥500
Retractility (%): ≤0.3
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Model:2018#
Appearance: yellow, red, green, white
Viscosity (cs): 15000~18000
Hardness (A): 25~28
Tensile strength (kgf /cm) ≥32
Tear-strength(kgf/cm) ≥22
Elongation break: (%)≥350
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time(min): 30
Curing time (hours): 2-4
Model: 268#
Appearance: yellow, red, green, white
Viscosity (cs): 25000~30000
Hardness (A):28~30
Tensile strength (kgf /cm) ≥35
Tear-strength ≥16
Elongation break: (%) 350
Retractility (%): ≤0.3
Curing agent mixed rate (%): 2-3
Operate time(min): 30
Curing time (hours): 2-4